The HP ProCurve 2910al Switch Series consists of four switches: the HP ProCurve 2910al-24G and 2910al-24G-PoE+ Switches with 24 10/100/1000 ports, and the HP ProCurve 2910al-48G and 2910al-48G-PoE+ Switches with 48 10/100/1000 ports. Each switch has four dual-personality ports for 10/100/1000 or mini-GBIC connectivity. In addition, the 2910al switch supports up to four optional 10-Gigabit (CX4 and/or SFP+) ports, thereby offering the most flexible and easy-to-deploy uplinks in its class. Together with static and RIP IPv4 routing, robust security and management, enterprise-class features, free lifetime warranty, and free software updates, the 2910 series is a cost-effective, scalable solution for customers who are building high-performance networks. These switches can be deployed at enterprise edge and remote branch offices, converged networks, and data center top of rack.
| Specs |
| Management features: |
| Switch type: |
Managed |
| Switch layer: |
L3 |
| Quality of Service (QoS) support: |
✓ |
| Web-based management: |
✓ |
| System event log: |
✓ |
| MIB support: |
MIB II, Bridge MIB, RIPv2 MIB, RMONv2 MIB, SMON MIB, RADIUS Client MIB, RADIUS Accounting MIB, Ethernet-Like-MIB, MAU MIB, Entity MIB, Ping MIB |
| Ports & interfaces: |
| Basic switching RJ-45 Ethernet ports quantity: |
48 |
| Basic switching RJ-45 Ethernet ports type: |
Gigabit Ethernet (10/100/1000) |
| Console port: |
RJ-45 |
| Network: |
| Networking standards: |
IEEE 802.3,IEEE 802.3ab,IEEE 802.3u |
| 10G support: |
✓ |
| Copper ethernet cabling technology: |
10BASE-T,100BASE-TX,1000BASE-T |
| Port mirroring: |
✓ |
| Full duplex: |
✓ |
| IP routing: |
✓ |
| Routing entries: |
2000 |
| Flow control support: |
✓ |
| Link aggregation: |
✓ |
| Rate limiting: |
✓ |
| Auto MDI/MDI-X: |
✓ |
| Spanning tree protocol: |
✓ |
| Auto-sensing: |
✓ |
| VLAN support: |
✓ |
| Data transmission: |
| MAC address table: |
16000 entries |
| Switching capacity: |
176 Gbit/s |
| Throughput: |
131 Mpps |
| Latency (1 Gbps): |
2.9 µs |
| Latency (10 Gbps): |
1.3 µs |
| Jumbo frames support: |
✓ |
| Packet buffer memory: |
6 MB |
| Security: |
| DHCP features: |
DHCP server |
| Access Control List (ACL): |
✓ |
| IGMP snooping: |
✓ |
| MAC address filtering: |
✓ |
| SSH/SSL support: |
✓ |
| Multicast features: |
| Multicast support: |
✓ |
| Design: |
| Rack mounting: |
✓ |
| Stackable: |
✓ |
| Product colour: |
Grey |
| Form factor: |
1U |
| Safety: |
EN 60950/IEC 60950; CAN/CSA 22.2 No. 60950; EN 60825; UL 60950. |
| Electromagnetic compatibility: |
FCC part 15 Class A; EN 55022/CISPR-22 Class A; VCCI Class A. |
| Performance: |
| Built-in processor: |
✓ |
| Processor model: |
ARM11 |
| Processor frequency: |
515 MHz |
| Memory type: |
SDRAM |
| Internal memory: |
512 MB |
| Flash memory: |
4 MB |
| Power: |
| AC input voltage: |
100 - 240 V |
| AC input frequency: |
50 - 60 Hz |
| Input current: |
6.4 A |
| Power consumption (typical): |
556 W |
| Power over Ethernet (PoE): |
| Power over Ethernet (PoE): |
✓ |
| Operational conditions: |
| Operating temperature (T-T): |
0 - 55 °C |
| Storage temperature (T-T): |
-40 - 70 °C |
| Operating relative humidity (H-H): |
15 - 95% |
| Storage relative humidity (H-H): |
15 - 95% |
| Heat dissipation: |
667 BTU/h |
| Weight & dimensions: |
| Width: |
442.5 mm |
| Depth: |
365.8 mm |
| Height: |
44 mm |
| Weight: |
5.88 kg |
