The HP 3800 Switch Series is a family of fully managed Gigabit Ethernet switches. There are a total of nine switch models—a 24-port switch, a 48-port switch, a 24-port PoE+ switch, a 48-port PoE+ switch
with either SFP+ or 10GBASE-T uplinks, and a 24-portSFP switch with 2 SFP+ uplinks. HP 3800 Series Switches utilize the latest HP ProVision ASIC technology and combine the latest advances in hardware engineering to deliver one of the most resilient and energy-efficient switches in the industry.
The 3800 series implements meshed stacking technology to deliver chassis-like resiliency in a flexible stackable form factor.
with either SFP+ or 10GBASE-T uplinks, and a 24-portSFP switch with 2 SFP+ uplinks. HP 3800 Series Switches utilize the latest HP ProVision ASIC technology and combine the latest advances in hardware engineering to deliver one of the most resilient and energy-efficient switches in the industry.
The 3800 series implements meshed stacking technology to deliver chassis-like resiliency in a flexible stackable form factor.
| Specs | |
| Management features: | |
| Switch type: | Managed |
| Switch layer: | L3 |
| Quality of Service (QoS) support: | ✓ |
| Web-based management: | ✓ |
| MIB support: | ✓ |
| Ports & interfaces: | |
| Basic switching RJ-45 Ethernet ports quantity: | 24 |
| Gigabit Ethernet (copper) ports quantity: | 24 |
| SFP/SFP+ slots quantity: | 2 |
| SFP+ module slots quantity: | 2 |
| Console port: | RJ-45 |
| ExpressCard slot: | ✗ |
| Network: | |
| Networking standards: | IEEE 802.1ab,IEEE 802.1D,IEEE 802.1p,IEEE 802.1w,IEEE 802.3,IEEE 802.3ab,IEEE 802.3az,IEEE 802.3u |
| 10G support: | ✓ |
| Copper ethernet cabling technology: | 1000BASE-T,100BASE-TX,10BASE-T |
| Port mirroring: | ✓ |
| Full duplex: | ✓ |
| IP routing: | ✓ |
| Routing entries: | 10000 |
| Link aggregation: | ✓ |
| Rate limiting: | ✓ |
| Auto MDI/MDI-X: | ✓ |
| Spanning tree protocol: | ✓ |
| Number of VLANs: | 2048 |
| Data transmission: | |
| MAC address table: | 65500 entries |
| Switching capacity: | 88 Gbit/s |
| Supported data transfer rates: | 10/100/1000 Mbps |
| Throughput: | 65400000 pps |
| Number of trunks: | 24 |
| Maximum data transfer rate: | 10000 Gbit/s |
| Jumbo frames support: | ✓ |
| Packet buffer memory: | 18 MB |
| Security: | |
| DHCP features: | DHCP server,DHCP client |
| Access Control List (ACL): | ✓ |
| IGMP snooping: | ✓ |
| Security algorithms: | 802.1x RADIUS,SSH,SSL/TLS |
| Static port security: | ✓ |
| SSH/SSL support: | ✓ |
| Multicast features: | |
| Multicast support: | ✓ |
| Protocols: | |
| Management protocols: | SNMP v3 |
| Design: | |
| Rack mounting: | ✓ |
| Stackable: | ✓ |
| Product colour: | Grey |
| Safety: | EN 60950/IEC 60950, UL 60950, CAN/CSA 22.2 No. 60950, EN 60825 |
| Certification: | FCC Class A; VCCI Class A; EN 55022/CISPR 22\nClass A\n80 PLUS GOLD\nEN 55024, CISPR 24, IEC 61000-4-2/3/4/5/6/8/11, IEC 61000-3-2/3, EN 61000-3-2/3 |
| Performance: | |
| Built-in processor: | ✓ |
| Memory type: | SDRAM |
| Internal memory: | 2048 MB |
| Flash memory: | 4096 MB |
| Noise level: | 36 dB |
| Firmware upgradeable: | ✓ |
| Power: | |
| Redundant power supply (RPS) support: | ✓ |
| Number of power supply units: | 1 |
| Input current: | 3 - 6 A |
| Power consumption (typical): | 127 W |
| Power over Ethernet (PoE): | |
| Power over Ethernet (PoE): | ✗ |
| Operational conditions: | |
| Heat dissipation: | 434 BTU/h |
| Weight & dimensions: | |
| Weight: | 6.92 kg |
| Other features: | |
| Management platform: | SNMP, Telnet, Web |
| Latency: | 1.9µs |
| Dimensions (WxDxH): | 467.4 x 442.7 x 43.2 mm |
| Connectivity technology: | Wired |
| Power supply: | 400 W |
| Power supply type: | HP X311 |
| Diagnostics: | LLDP |
| Networking features: | Gigabit Ethernet, 10G Ethernet |
| Security features: | CLI, GUI, MIB |
| Authentication method: | IEEE 802.1X, RADIUS, MAC |
| Wi-Fi: | ✗ |
| Mounting: | 1U |
| Remote administration: | CLI (Console/Telnet/SSH) |
| Input frequency: | 50 - 60 Hz |
| Input voltage: | 100 - 240 V |
