The HP 2920 Switch Series provides security, scalability and ease of use for enterprise edge, SMB and branch office access layer deployments. A powerful HP Networking ASIC delivers low latency, more packet buffering, and adaptive power consumption to this robust Basic Layer 3 switch that supports modular stacking, 10GbE, RIP routing, PoE+, ACLs, sFlow and IPv6.
The HP 2920 Switch Series can be managed with the optional HP Intelligent Management Center (IMC) software for a single view of your entire network and is ready for the Software-defined Network (SDN) with OpenFlow support.
The HP 2920 Switch Series can be managed with the optional HP Intelligent Management Center (IMC) software for a single view of your entire network and is ready for the Software-defined Network (SDN) with OpenFlow support.
| Specs | |
| Management features: | |
| Switch type: | Managed |
| Switch layer: | L3 |
| Quality of Service (QoS) support: | ✓ |
| Web-based management: | ✓ |
| Ports & interfaces: | |
| Basic switching RJ-45 Ethernet ports quantity: | 24 |
| Basic switching RJ-45 Ethernet ports type: | Gigabit Ethernet (10/100/1000) |
| Network: | |
| Networking standards: | IEEE 802.3,IEEE 802.3ab,IEEE 802.3u |
| 10G support: | ✓ |
| Copper ethernet cabling technology: | 10BASE-T,100BASE-TX,1000BASE-T |
| Full duplex: | ✓ |
| IP routing: | ✓ |
| Flow control support: | ✓ |
| Link aggregation: | ✓ |
| Rate limiting: | ✓ |
| Auto MDI/MDI-X: | ✓ |
| Spanning tree protocol: | ✓ |
| Auto-sensing: | ✓ |
| VLAN support: | ✓ |
| Optical fiber: | |
| Switching optical modules type: | 40 Gigabit Ethernet |
| Data transmission: | |
| MAC address table: | 16000 entries |
| Switching capacity: | 128 Gbit/s |
| Throughput: | 95.2 Mpps |
| Latency (10-100 Mbps): | 9 µs |
| Latency (1 Gbps): | 3.3 µs |
| Latency (10 Gbps): | 3.3 µs |
| Packet buffer memory: | 11.25 MB |
| Security: | |
| DHCP features: | DHCP server |
| Access Control List (ACL): | ✓ |
| IGMP snooping: | ✓ |
| SSH/SSL support: | ✓ |
| Multicast features: | |
| Multicast support: | ✓ |
| Design: | |
| Rack mounting: | ✓ |
| Stackable: | ✓ |
| Product colour: | Grey |
| Form factor: | 1U |
| Performance: | |
| Virtual stacking (units): | 4 |
| Built-in processor: | ✓ |
| Processor model: | ARM11 |
| Processor frequency: | 625 MHz |
| Memory type: | SDRAM |
| Internal memory: | 512 MB |
| Flash memory: | 1024 MB |
| Power: | |
| Power supply included: | ✓ |
| AC input voltage: | 100 - 240 V |
| AC input frequency: | 50 - 60 Hz |
| Power consumption (typical): | 58 W |
| Power over Ethernet (PoE): | |
| Power over Ethernet (PoE): | ✗ |
| Operational conditions: | |
| Operating temperature (T-T): | 0 - 55 °C |
| Storage temperature (T-T): | -40 - 70 °C |
| Operating relative humidity (H-H): | 15 - 95% |
| Storage relative humidity (H-H): | 15 - 95% |
| Heat dissipation: | 198 BTU/h |
| Weight & dimensions: | |
| Width: | 442.5 mm |
| Depth: | 336 mm |
| Height: | 44.5 mm |
| Weight: | 5.25 kg |
